The fresh water tank from C.A.K Tanks

Installing the hot and cold water in the bathroom

The fresh water tank situated inside the van under the seat

Hole has been cut out to allow toilet to be emptied

The fresh water tank is situated under the seat

The tank can be accessed from inside or outside the van

Checking that two gas cylinders can be stored.

Gas pipes being laid

The gas cylinder inside the container

Water pipes have been installed under the other seat for the carver heater

Picture of the water pipes in the bathroom

Carver cascade II installed under the seat

The ouside picture of the water heater outlet

First part of wall unit has been installed

Close up of the shower base

Waste water pipe underneath the van

The shower drain viewed from under the van

Waste pipe from shower tray

Waste water tank nearly in place

This was made to hold the waste tank

Light switch being installed

The bracket for the waste tank is taking shape

Waste tank firmly in place

Checking it drains properly...

Kitchen sink water pipes

The sink of the bathroom wall unit

Base of the bathroom

The mirror had to be trimmed at each side to allow it to fit

Top of the bathroom wall unit and skylight

Thetford toilet being installed

View of bathroom form seat

Wires and battery being placed under bonnet

Battery in place

Wallboard was used to fill gap between toilet and unit

Finished!!

Another view of bathroom unit and light

Painted Gas Cupboards with Braces

Dropout Vents Covered

Gas bottles installed

Fuse box fitted above gas box at the back of the van

Feed for the fuse box

Covering water pipes with insulation